REVITALISATION AND FILTRATION OF WATER

AQUA SANATURA® company has set as its main goal to provideunits for revitalization and regeneration of water. These units are designed in 3 product lines divided in accordance to where the unit will be uses. Product line AQE- H is designed for private homes, line AQE- P is designed for swimming pools, wellness studios and spas, and last but not least line AQE- I is designed for wide range of commercial use of our technology.

We also offer complementary products – 2 step filtration units AQF providing mechanical filtration and filtration of chlorine from public water sources. These filtration units can be use in households, pensions and restaurants etc.

REVITALIZATION

FILTRATION

Products of line AQE-H can be used in flats, houses, block of apartments, pensions, restaurants, tee and coffee houses, cafés, hotels etc.

REVITALIZATION OF WATER - line AQE-H

Product number

Location

Recommended flow

Connection

AQE-H 038

Local installation on cold water pipe before the tap on sinks or bath tubes.

• Due to the size of this unit, it can also be used as a portable unit for your business trips or holidays.

up to
15 l/min

3/8"

AQE-H 050

 Flat or small house.

• Can be installed in claiming plumbing in apartment houses on main pipe after water meter.

up to
32 l/min

1/2"

AQE-H 075

Family house, pension, or similar connected to public water supply or with own well, where a water pump keeps stabile pressure in the system (can be in combination with a small pressure water tank up to 10 l).

up to
45 l/min

3/4"

AQE-H 100

Family house with its own well, where water pump is in combination wit larger pressure tank (the capacity of water tank is higher than 10 l), hotels, block of apartments, restaurant, etc.

up to
60 l/min

1"

Product line AQE-P was created by AQUA SANATURA® to revitalise and activate water used in wellness studios, spas, public swimming pools, aqua parks and similar.

REVITALIZATION OF WATER IN SWIMMING POOLS, WELLNESS a SPA - line AQE-P

Product number

Recommended flow
(with max. pressure loss up to 0,3 bar)

Connection

AQE-P 150

From 75 l/min to 150 l/min

1 1/2"

AQE-P 200

From 120 l/min to 240 l/min

2"

AQE-P 250

From 200 l/min to 400 l/min

2 1/2"

Product line AQE-I can be used  for water revitalisation in wide range of industrial areas, such as food industry, waterworks engineering, building industry, agriculture and breeding of livestock, dry cleaners, industrial laundries, car washes and many others, where water and its quality plays a vital role and can save materials and energy  or increase quality of the final product.

REVITALIZATION OF WATER FOR INDUSTRIAL APLCATIONS -  řada AQE-I  

Product number

Recommended flow
(with max. pressure loss up to 0,3 bar)

Connection

AQE-I 050

up to 18 l/min

1/2"

AQE-I 075

up to 30 l/min

3/4"

AQE-I 100

up to 50l/min

1"

AQE-I 150

up to 125 l/min

1 1/2"

AQE-I 200

up to 200 l/min

2"

AQE-I 250

up to 340 l/min

2 1/2"

To increase quality of revitalised water, we also offer filters – product line AQF, which can filtrate water mechanically and also remove chlorine from drinking water supplied by public suppliers. These filtration units are mainly useful in private houses, pensions, restaurants, tee and coffee houses, where revitalized water is used for drinking.

TWO STEPS FILTRATION - AQF 050

Two steps filtration unit is used for filtration of mechanical impurities bigger than 1 micron and also chlorine and unwanted smell and taste of drinking water from public water supply.

AQF 050

Recommended product combination:
In accordance to installation placement and water flow, we recommend to combine it with AQE-H038 or AQE-050 for regeneration and revitalisation of water from public water supply.

Technical information:

Maximum flow: up to 24 l/min.
Operating pressure: up to 6,8 bar
Operating temperature: +5°C - +38°C

Filling - 1. step: AQF050-V1
Filling - 2. step: AQF050-V2
Measurements: 295x145x355
Permitted temperature of surrounding: +5°C - +40°C

AQF 050 - V1   filling – 1. step

Filtration:
Filtration of mechanical impurities bigger than 1 micron, such as sand, rust, water slime and clay and turbidity caused by it.

Impurities size:
> 1 micron
Material:
Polypropylene foam
Longevity:
up to 6 months

Description:
Density of fibres in filtration filling increases from the beginning to the end. This technology ensures gradual filtration from bigger to smaller particles, which increases quality of filtrated water and the filling itself lasts longer in comparison to ones with consistent structure.

 AQF 050 - V2  filling – 2. step

Filtration:
Chlorine, chloramines, unwanted smell and taste, carcinogenic chlorine organic substances created by chlorine and organic matter, petroleum products, artificial contamination, cysts and so on.

Material:
pressed activated carbon
Longevity:
22 700 litres or 6 months

Description:
Filtration filling made of pressed activated carbon, called “carbon block”. It contains higher amount of carbon pressed in to a block of high density. During the process of production, carbon is activated by high temperatures and pressure and within carbon a net of cavities of microscopic measures is created. This highly increases the ability of carbon to absorb substances.

TWO STEPS FILTRATION - AQF 100

Two steps filtration unit is used for filtration of mechanical impurities bigger than 5 microns and also chlorine and unwanted smell and taste of drinking water from public water supply.

AQF 100

Placement:
To be placed at the main water supply in a big flat or house, pension, restaurant, small hotel etc.

Recommended combination:
In accordance to installation placement and water flow, we recommend to combine it with AQE-H075 or AQE-H100 for regeneration and revitalisation of water from public water supply.

Description:
First step of filtration – mechanical filtration block – is designed to filter mechanical impurities and sediments and it has 2 layers: 50 microns and 5 microns.
Second step of filtration has modified carbon filling to filter chlorine, unwanted smells and tastes. Due to specific activated granulated carbon with specific flow ducts this block has a higher permeability. Maximal flow of the system is 60 l/minute.

 AQF 100 - V1  filtration block 1.step

Filtration:
Filtration of mechanical impurities bigger than 5 micron, such as sand, rust, water slime and clay and turbidity caused by it.

Impurities size:  > 5 micron
Material:  Polypropylene foam
Longevity:  up to 6 months

Description:
Density of fibres in filtration filling increases from the beginning to the end. This technology ensures gradual filtration from bigger to smaller particles, which increases quality of filtrated water and the filling itself lasts longer in comparison to ones with consistent structure.

 AQF 100 - V2   filtration block 2.step

Filtration:
Chlorine, chloramines, unwanted smells and tastes, carcinogenic chlorine organic substances created by chlorine and  organic matter, petroleum products, artificial contamination, cysts etc.

Material:
pressed activated carbon of radial flow
Longevity:
132.500 litres or 6 months

Description:
Filtration filling made of pressed activated carbon, called “carbon block”. It contains higher amount of carbon pressed in to a block of high density. During the process of production, carbon is activated by high temperatures and pressure and within carbon a net of cavities of microscopic measures. This highly increases the ability of carbon to absorb substances.
Additional filtration of 20 microns is at the end.

Products of line AQE-H

Example of combination
AQF 050

One of possibilities of installation is AQE – H038 unit and filtration unit AQF 050, which can be installed directly under the sink on cold water pipe.
  

Soustava AQF 050

Example of installation
AQF 100

AQF 100 can be combined with AQE- H075 unit for water revitalisation.